|
It's easier than that motorhead...
We remove the license plate, four screws, then slide the mount bar into the hole... pin it inside the trunk, slide the release cable through a little hole drilled, and screw the remote battery shut off in... Done racing, slide the cable back in, unpin the chute bar and slide it out, then unscrew the remote battery shutoff and screw the plate back on... Five to ten minutes either way...
I've also seen one on an older car that had a flip down license plate...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you.
“If everything seems under control, you're just not going fast enough.” Mario Andretti
If you can turn, you ain't going fast enough...
|