Quote:
Originally Posted by 2SSCAMARO
The sensors installed in the winter wheels is all that you will need BUT....The installer will have to relearn the BCM to recognize the new sensors. Also when you change the wheels and tires in the spring, you will have to relearn the "summer" sensors. Depending on what model and year you have, you may be able to do the relearn procedure shown in the owner's manual. If not, you'll have to either purchase a relearn tool or take the car to a business that provides that service.
|
Quote:
Originally Posted by Spartan01
on the 2010-2012 (I think) you could reset or relearn the TPMS sensors fairly simply,
later models need a special tool.
The procedure involves going to the tire pressure display in the data display on the dashboard, then letting out a little bit of air from each tire, then the horn and lights flash and you are all set
|
Very helpful, thank you!
The installer should be capable of the initial learning, and I'll handle the solution for re-learning around Spring time.