Quote:
Originally Posted by SSMickey
You can pull your header plate and get to the mounting screws of the control box with a right angle screwdriver. Once you do that, you should have enough slack in the harness to get to the plugs by crawling under the front bumper and reaching up. Hardest part about the whole thing is removing the header plate from around the hood latch.
|
I've never removed the "header plate from around the hood latch". I assume that this is the metal piece that you are talking about. It isn't necessary to remove it. The bumper cover has (I think 6) plastic panel holders. So on the top there are 6 clips and two screws.