Quote:
Originally Posted by 572HP
Nathan...wow! Just wow! After reading and re-reading your post about your wiring, I'm still not certain as to what happened.
Also, I wrote up a thread about the alternator pulley:
Alternator/Generator Pulleys |
572HP, thanks for the feed back. I reread it and saw were it could use some further clarification. I'm editing the post to make it clearer and I'm adding this pic to help elaborate.
See EZ's picture below. He just drill a hole onto the frame. Plus he removed 1 ounce off the front end by drilling, LOL.
My challange was that I ASS...UME I could just ground the cable by removing the bolt that holds the bracket down for the ABS. Little did I know it would heat up the ABS lines to the point the whole car would have gone up in smokes!
Let me know if that helps clarify a little better.