Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - I pulled the trigger on my home built NAV Radio this weekend:

rray · 10-20-2013, 09:40 PM

And after slapping the case together, installed a USB Bluetooth Dongle, and a Dual Band N WIFI Dongle:

There's lots of ports for expansion, as I add more devices down the road:

I modified the Metra kit to fit an 8" HDMI touchscreen, HDMI and Composite TFT driver board with auto video switching so I could switch from PC to Backup Camera whe I put the tranny in reverse, a Joycon programmable steering wheel button interface, and an intellegent 80W DC-DC converter to provide computer grade power for the screen and electronics:

I mounted the PC, Amps, Cap, and Sound Processor behind the seat and on the backside of the SUB box. Everything here is powered from a second Stinger Battery when the engine is off, and isolation opens up after the engine is started:

I have both a 1 Farad cap and a backup battery. The cap is just to make extra sure I don't have any power dips that could cause the PC to reset. Here is the batteries and isolation solenoid:

Here is the 8" touchscreen mounted in the metra dash kit:

10-20-2013, 09:40 PM	#2
rray Drives: 2013 GAZ 2SS/RS Join Date: Feb 2012 Location: Fremont, CA Posts: 418	And after slapping the case together, installed a USB Bluetooth Dongle, and a Dual Band N WIFI Dongle: There's lots of ports for expansion, as I add more devices down the road: I modified the Metra kit to fit an 8" HDMI touchscreen, HDMI and Composite TFT driver board with auto video switching so I could switch from PC to Backup Camera whe I put the tranny in reverse, a Joycon programmable steering wheel button interface, and an intellegent 80W DC-DC converter to provide computer grade power for the screen and electronics: I mounted the PC, Amps, Cap, and Sound Processor behind the seat and on the backside of the SUB box. Everything here is powered from a second Stinger Battery when the engine is off, and isolation opens up after the engine is started: I have both a 1 Farad cap and a backup battery. The cap is just to make extra sure I don't have any power dips that could cause the PC to reset. Here is the batteries and isolation solenoid: Here is the 8" touchscreen mounted in the metra dash kit: __________________ If you see it, get it, for tomorrow it may be gone!