Quote:
Originally Posted by The_Creepy_Zebra
If you didnt want to see the led until its on couldn't you just put a couple light coats over the part you taped or would the color be to different.
|
Yes you could. Really cool idea!! I might do it too. Use primer on the entire lens Except the slit. Then paint the entire lens with base coat. The primer does most of the work blocking out the LEDs. This should work ok for white.
__________________
Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End
Next mod: Done!