Quote:
Originally Posted by RBDesigns
Hope you get a spot at SEMA......
|
Shooting for Toyo.....
Just wanted to post up what I started on today to clean up the engine bay.
I started by undoing my current fuel fittings
To get the fittings off the back of the fuel rail, I needed to take off the fuel rails, and realized I loaned my hex tools to my friend! So I was at a standstill. One thing I've never been happy with is the heater hoses, so those came off the engine and I figured that I wanted to route them out of sight; took measurements and got some more tubing ordered today.
Also I didn't care for the look of the EVAP solenoid or line, so those got taken off and will be mounted next to the computer.
I also removed the methanol tank and will be sanding it down a little a spraying it black.
I'm also rewrapping some of the electrical lines with heat shrink to give it a cleaner look.
I also removed the intake tube and will be removing the powdercoat. I plan on polishing it to a shine, if I run into issues I'll just have it powdercoated black.
Tomorrow I'll be finishing up the fuel lines, then will work on rewrapping the electrical wires in harness tape and heatshrink.
I also ordered some more fittings to redo the water vapor line and the hose that connects to the radiator!
There's just more and more that I want to do!
Thanks for the writeup Nathan; it's been a HUGE help already!