Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

TeddyP25 · 11-15-2010, 03:29 PM

CGM stock to stroked..
From a stock 2SS/RS to a Stroker 418 Supercharged Camaro...hmm where to begin

Basics-
Ground Effects, painted
Window tint
Custom bow ties
RPI floor/trunk mats

Suspension-
Pfadt- engine mounts, coil overs, sway bars, trailing arms
toe links, end links, diff bushings, sub frame bushings
BMR chassis brace with tunnel cover

Brakes-
Hawk performance pads, Stillen drilled/slotted rotors, braided brake lines

Engine/Drivetrain-.....built by WyoSpeed built(Brian Trembly)
418 Stroker LS3
Callies 4" crank, 6.125 Compstar rods
CP Racing pistons 4080 -13.8 pistons
GM CNC heads
ARP 2000 bolts
Tooley Racing Cam
Edelbrock E-Force Supercharger
Innovators West 8rib 2.6 pulley
10% OD
Custom valve cover with Scott plug wires
ADM Performance Race CAI(custom tube)
Tick Performance Level 3 trans build
Tick Performance quick clutch bleeder
ADM dual gauges
ZR-1+clutch
Custom clutch slave reservoir
BMR driveshaft loop
DSS level 5 shafts
DSS Aluminum drive shaft
Hammerhead rear, 3;73's
RX monster Catch Can
JRE posi kit
JRE fuel upgrade kit
LPE dual fuel pump with electric module
ARH 1 7/8 Headers
ARH Axelback exhaust
RMCR custom tune..
MGW shifter

Wheels-
TSW Vairano 8.5/10x 20's
Nitto 315's/275's

Audio-
JL Audio Amp with Jl 10w6 Sub
Focal door and rear speakers
JL Audio Amp

11-15-2010, 03:29 PM	#1
TeddyP25 Drives: 2SS Join Date: May 2009 Location: Fort Collins Posts: 611	Stroked CGM CGM stock to stroked.. From a stock 2SS/RS to a Stroker 418 Supercharged Camaro...hmm where to begin Basics- Ground Effects, painted Window tint Custom bow ties RPI floor/trunk mats Suspension- Pfadt- engine mounts, coil overs, sway bars, trailing arms toe links, end links, diff bushings, sub frame bushings BMR chassis brace with tunnel cover Brakes- Hawk performance pads, Stillen drilled/slotted rotors, braided brake lines Engine/Drivetrain-.....built by WyoSpeed built(Brian Trembly) 418 Stroker LS3 Callies 4" crank, 6.125 Compstar rods CP Racing pistons 4080 -13.8 pistons GM CNC heads ARP 2000 bolts Tooley Racing Cam Edelbrock E-Force Supercharger Innovators West 8rib 2.6 pulley 10% OD Custom valve cover with Scott plug wires ADM Performance Race CAI(custom tube) Tick Performance Level 3 trans build Tick Performance quick clutch bleeder ADM dual gauges ZR-1+clutch Custom clutch slave reservoir BMR driveshaft loop DSS level 5 shafts DSS Aluminum drive shaft Hammerhead rear, 3;73's RX monster Catch Can JRE posi kit JRE fuel upgrade kit LPE dual fuel pump with electric module ARH 1 7/8 Headers ARH Axelback exhaust RMCR custom tune.. MGW shifter Wheels- TSW Vairano 8.5/10x 20's Nitto 315's/275's Audio- JL Audio Amp with Jl 10w6 Sub Focal door and rear speakers JL Audio Amp __________________ 2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687 Last edited by TeddyP25; 09-30-2015 at 06:07 PM.