Quote:
Originally Posted by KalCorp
Ok so I had my lights hooked up to the dome lights for a long time now. Works good on and off automatically when doors are open.
However at shows when you turn on dome light it will time out and turn off after time.
Do you think adding another switched 12v line to the dome line will cause a problem ? Don't know if adding +12v to that line that is controlled by computer will back feed and break something.
Sent from my iPhone using Tapatalk
|
There's another post about wiring up a on-off-on switch:
You can have it set to work with your dome light and fade, off, or
on using the Accessory wire
http://www.camaro5.com/forums/showth...light=footwell