Quote:
Originally Posted by SUX2BU
It does sound too good to be true, but when you have done well over 200 cam installs you know what you are doing. It works out to about $40-$50 an hour, which I think is very reasonable. The prices everyone is quoting around here work out to about $200 an hour
|
hmmm $200 seems too cheap...
Shop here charges $72/hr for shop labor. They estimated 4 hours just to drop the eng & trans then 7 hours install time for all the parts and 4 hours to put it back in. (15hrs)... They told me right @ about $1,080 for labor + $$ for dyno & tune.
Granted it is A6 and needs Torque converter with a Cam installed and I'm having all 16 lifters replaced along with pushrods & springs & timing chain/gear.
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft