Quote:
Originally Posted by was619
I am running a nitto invo 275-40/20 up front which is 28.66 inches according to a few different sites.
The main issue might be the change in offset and the wider tire. Since the offset of the factory front and rear wheels are different and I have the rear 9inch rims in the front and back now.
Thanks for the responses though!
|
Tire pressures decrease or increase tire movement. Your PSI is an important factor.
You are right about the offsets. You can use a 3 to 5mm spacer to move the wheel out. Check the amount of thread captured in the lug nuts. As long as the nut is filled with threads you are good to go.
Pushing the front wheels out will also improve your handling. adding just 6mm in front track reduces understeer significantly.