Quote:
Originally Posted by EarlyApex
The install of the radius arm bushing is done. I bought a Kent Moore removal tool and that with some heat and a hammer was able to bet the ball joints removed. I did have to modify the tool to clear the corners of the nut and also buy a longer bolt but I am still only into is $25. The rest of the job was easy. I used my press to remove the stock bushings and press in the new. I marked the bushings to help in getting them centered. They are .400" in from the edge. I am getting the alignment today so I will know later how it feels compared to stock.
|
The Pfadt radius bush is more stable at speeds over the Pedders red bush but the steering response is better with the Pedders bush. Here is a picture of my drivers side arm going in this weekend.