Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

thebrainhart · 12-13-2011, 01:51 AM

Here are the pics.
I also noticed upon extremely close inspection, that the very bottom of the center verticle rib has detached from the bottom molding, as shown in the pictures. When installed, it will hold it tight against it, and will not affect anything; or it could be glued back together.
As I said before, even unpainted it will still look pretty good, but painted should look just fine!

There are about 9 people that were interested in it, now with pictures, let me know if you're still interested, and we'll go from there, first come, first served.

Thanks!
- Jeremy

12-13-2011, 01:51 AM	#7
thebrainhart Drives: '10 Camaro 2SS/RS CGM LS3 A6 Join Date: May 2009 Location: Bountiful, UT Posts: 683	Here are the pics. I also noticed upon extremely close inspection, that the very bottom of the center verticle rib has detached from the bottom molding, as shown in the pictures. When installed, it will hold it tight against it, and will not affect anything; or it could be glued back together. As I said before, even unpainted it will still look pretty good, but painted should look just fine! There are about 9 people that were interested in it, now with pictures, let me know if you're still interested, and we'll go from there, first come, first served. Thanks! - Jeremy Attached Images __________________ - 2010 Camaro 2SS/RS CGM LS3 A6 "Lurch" - FLYNGSS - Some ProCharger, Alky, CompCams, Brian Tooley, Holley, Livernois, K&N, Ridetech, DSS, Kooks, JDP Motorsports, Pfadt, BMR, Prothane, Weld, M&H, Mickey Thompson, RKSport, Elite, Garys, Defenderworx, Anvil, etc.