Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Astoc · 06-09-2013, 02:34 PM

A PM I received from another forum member alerted me to a mistake in my listing. I had the headers listed as having 1-3/4" primaries. However, Dynatech does not make these headers with 1-3/4" primaries. They are only available with 1-7/8" primaries. That information can be found here, by selecting either the 2.5" or 3" system on the left-hand side of the webpage:

http://www.dynatechheaders.com/sm_camaro.html

My original post has been updated accordingly.

06-09-2013, 02:34 PM	#37
Astoc Drives: none Join Date: Jan 2013 Location: none Posts: 81	A PM I received from another forum member alerted me to a mistake in my listing. I had the headers listed as having 1-3/4" primaries. However, Dynatech does not make these headers with 1-3/4" primaries. They are only available with 1-7/8" primaries. That information can be found here, by selecting either the 2.5" or 3" system on the left-hand side of the webpage: http://www.dynatechheaders.com/sm_camaro.html My original post has been updated accordingly.