View Single Post
Old 11-11-2009, 10:51 AM   #14
21STCENTURY
 
Drives: Z28/700HP, CTSV/850HP, Viper/725HP
Join Date: May 2009
Location: Addison, TX
Posts: 128
Quote:
Originally Posted by old motorhead View Post
Good job! That's a whole lot of go on very little boost. LS3's and TVS's work well together. What size pulley did you use? I guess the cam specs are "secret"?

I'm looking for a little milder setup than the one on my vette. Vette made 672 at the wheels on a little over 8psi. It will go on wife's Camaro (auto tranny). The cam I used in the vette would be too big for an auto tranny Camaro. Would your cam play nice with an auto tranny/stock converter?
Here's the specs you requested;
We have done quite a few of these cams on Forced Induction LS3 MN-6 Cars
with excellent results. Awesome drivability with a nice "chop" excellent TQ,
makes peak power @ 6500 RPM

21CMC F3 Camshaft

227/239
.629/.623
114 lsa

I have another cam in stock that would work well for the automatic without a converter, let me know if I can help you further.

Best Regards,
John Page
21STCENTURY is offline   Reply With Quote