Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - DIY - Camaro Dash ABL Install

Gene Culley · 02-20-2011, 01:28 PM

Hello All,

I know 2SSRS and some others have done an awesome job explaining how they have done the ABL mod. In reading some of their DIY threads I was still left with some questions, so I am just doing a simple write-up in my own manner to see if I can help out at all. I read and posted in 2SSRS’s original thread here…http://www.camaro5.com/forums/showthread.php?t=40804.

2SSRS (Ofer is his real name) has a great post and helped me out tremendously during the process. Again, my write-up is simply to write up my experience and to answer some of the questions I had during my project.

The last 8 of my VIN are A9113647 and it is a 2010 Camaro 2SS/RS. Ofer states that GM pre-wired all of the 2010 Camaro’s up to VIN A9160000 for the ABL mod. After these VIN’s you will have to use a t-tap method for power, which is basically using a connector to tap power from another wire. You can get the t-tap method from Ofer’s thread…http://www.camaro5.com/forums/showthread.php?t=40804.

The method I used requires no drilling at all.

02-20-2011, 01:28 PM	#1
Gene Culley Account Suspended Drives: 2013 SS Join Date: Dec 2009 Location: Boyertown, PA Posts: 1,374	DIY - Camaro Dash ABL Install - GM Parts House Hello All, I know 2SSRS and some others have done an awesome job explaining how they have done the ABL mod. In reading some of their DIY threads I was still left with some questions, so I am just doing a simple write-up in my own manner to see if I can help out at all. I read and posted in 2SSRS’s original thread here…http://www.camaro5.com/forums/showthread.php?t=40804. 2SSRS (Ofer is his real name) has a great post and helped me out tremendously during the process. Again, my write-up is simply to write up my experience and to answer some of the questions I had during my project. The last 8 of my VIN are A9113647 and it is a 2010 Camaro 2SS/RS. Ofer states that GM pre-wired all of the 2010 Camaro’s up to VIN A9160000 for the ABL mod. After these VIN’s you will have to use a t-tap method for power, which is basically using a connector to tap power from another wire. You can get the t-tap method from Ofer’s thread…http://www.camaro5.com/forums/showthread.php?t=40804. The method I used requires no drilling at all.