Having Trouble Removing Radius Rod
I'm struggling with trying to get the outside end of the front radius rod loose from the spindle on my 2010.
I need to get it out of the car to change the bushings.
I have a pickle fork, but it hits the spindle, before it pops the stud loose.
I've also tried my air hammer on the end of the stud, and tried tapping it loose with a hammer too.
If worse comes to worse, I can cut the tips off of my pickle fork, but I really don't want to do that.
Anyone have any suggestions for knocking these loose?
TIA!
__________________
'71 Z/28 RS Mulsanne Blue w/Black stripes,
2002 SS M6 Pewter w/ stripes Daily driver
2010 2SS/RS M6 Black on Black
2013 K2500 Duramax CC Black on Black
|