Quote:
Originally Posted by Tuborg
Old thread but, i am trying to datalog from sct x3 to laptop, has ben working great until now when i trying to log Wb from analog, i have readings to the sct but when i using that pid (analog1) it is not showing annything, not analog or any of the other pid`s. Do anyone no what to do. It does record but not showing any readings.
Thanks.
|
It sounds like you have not set up the hand held analog function to work in pass through mode. You need to select the monitor setup function on the hand held and then select the analog1 function and then select the proper formula for your WB. You only need to do this once and then after that the analog data will pass through the hand held and into the lap top loaded with the live link software. You also (one time) need to bring up the config file in live link, select tools, then equations, the select one of the preset equations like for example (v*2)+10 and then click on the green arrow for analog input 1. You should be good to go.