Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Kscott46 · 02-08-2011, 09:55 PM

So I installed my scanner light from AAC today. Was pretty easy, I used a dremel to cut out the corners. I was able to mold the light a little by heating the center of the light, fits like a dream! The only problem is, IT TURNS ON BY ITS SELF!!! I was driving home and everyone suddenly moves out of my way, well the lights were on! I say "Oh sh$#"! Does anyone have the same problem? Could it be were I grounded it? I used one of the existing holes used for the metal plate on the facia, I had to scrape some paint off to make contact. When it turns on by its self, it wont respond to the remote. Help Guys! Thanks in advance!

02-08-2011, 09:55 PM	#1
Kscott46 Drives: 2010 Black SS2, RS, MT Join Date: Oct 2009 Location: Brownsville, Texas Posts: 68	Help with AAC Scanner light! So I installed my scanner light from AAC today. Was pretty easy, I used a dremel to cut out the corners. I was able to mold the light a little by heating the center of the light, fits like a dream! The only problem is, IT TURNS ON BY ITS SELF!!! I was driving home and everyone suddenly moves out of my way, well the lights were on! I say "Oh sh$#"! Does anyone have the same problem? Could it be were I grounded it? I used one of the existing holes used for the metal plate on the facia, I had to scrape some paint off to make contact. When it turns on by its self, it wont respond to the remote. Help Guys! Thanks in advance! __________________ Black and Silver Striped SS2/RS M6 Current Mods: PFADT Springs ,Hurst Short Shifter, Roto Fab Intake, SLP LM II Axel Back Ex, NLP Dove Tail Spoiler, AAC Interior LED's (Blue), Defender Works Black Bow Ties. Future Mods: PFADT Sways, SLP cat back, SLP X-pipe, SLP Headers, and Tune.