Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Experts- need some serious help

Matt @ FSP · 10-09-2013, 08:16 PM

I'll be handling some remote tuning on this to try to get it in line. Camper is an awesome guy and I just want his car to run correct.

Look at the narrowbands just drop out, so its going real on the lean side based upon the narrowbands and wideband reporting that Camper has told me. Any situation like that will induce knock of course.

This car can be tuned fine on GMVE/MAF, MAF only or VE/SD only... Just pick one. However this tune was setup by turning off the LTrims and putting it in MAF mode only is definitely not my choice with a blower setup without having multiple bypass valves at this level. You just won't dump the air fast enough to have a steady MAF curve.

Making adjustments on the GMVE in non-custom OS in HPTuners is actually very easy. Use Bluecat's EQ>VE program. The SD tunes take less time because you are only tuning a base VE table, not going back and forth between turning off the MAP, dialing in the GMVE and turning back on MAF...

10-09-2013, 08:16 PM	#27
Matt @ FSP Drives: 2011 Camaro SS Join Date: Dec 2012 Location: Bradenton, FL Posts: 2,610	I'll be handling some remote tuning on this to try to get it in line. Camper is an awesome guy and I just want his car to run correct. Look at the narrowbands just drop out, so its going real on the lean side based upon the narrowbands and wideband reporting that Camper has told me. Any situation like that will induce knock of course. This car can be tuned fine on GMVE/MAF, MAF only or VE/SD only... Just pick one. However this tune was setup by turning off the LTrims and putting it in MAF mode only is definitely not my choice with a blower setup without having multiple bypass valves at this level. You just won't dump the air fast enough to have a steady MAF curve. Making adjustments on the GMVE in non-custom OS in HPTuners is actually very easy. Use Bluecat's EQ>VE program. The SD tunes take less time because you are only tuning a base VE table, not going back and forth between turning off the MAP, dialing in the GMVE and turning back on MAF... Last edited by Matt @ FSP; 10-10-2013 at 08:27 AM.