[dc5-s]

Originally Posted by dms

Here is the data on Pete's suspension:

305-30R19 all 4 corners
10.5 wide wheels from Forgeline

Here is the Justice Pete Camaro package

CAMARO JUSTICE PETE XA TRACK EXTREME
SPECIAL NOTE: Racing Helmit and Driving Suit Not Included!!
Part # Pedders Component Price
160086 Camaro eXtreme Xa Multi Adjustable Coilover Kit By Pedders with 8kg/mm Front and 10kg/mm Rear Coil Rates $1,449.99
EP1167HD REAR ZETA HD DIFFERENTIAL BUSHING KIT $138.36
EP1201 CAMARO TOTAL REAR SUB FRAME BUSHING REPLACEMENT $449.03
EP2112 Zeta Steering Rack Bush $26.25
EP6577 CAMARO Front Radius Rod Bushing $198.59
EP7322 Camaro Rear Control arm - Upper inner rear. Possibly being updated $96.20
EP7264 Zeta rear lower control arm inner $96.20
EP7323 Zeta Camaro Rear Toe, and trailing arm links in and out. $96.20
EP7323 Zeta Camaro Rear Toe, and trailing arm links in and out. $96.20
PDUSACAMFULL CAMARO REAR EXTENDED CAMBER, TOE ADJUSTERS, FRONT CASTER ECCENTRICS & CAMBER ADJUSTERS $210.00
EP7323 Zeta Camaro Rear Toe, and trailing arm links in and out. $96.20
EP7323 Zeta Camaro Rear Toe, and trailing arm links in and out. $96.20
CAMAROSOLUTIONC 27MM FR. & 32MM REAR SWAY BAR WITH 4 ADJUSTABLE ENDLINKS Larger HD end links require enlarging mounting holes. Special Note: The 32mm sway bar is a Track ready bar and should only be installed on vehicles driven by SCCA or NASA qualified drivers. This bar may be set up to induce oversteer! $649.98
CAMARO JUSTICE PETE XA TRACK EXTREME PARTS TOTAL $3,699.40

Menu System Discount Estimate $449.91
SCCA and NASA Drivers Note:
We offer alternative coils for those trained drivers that feel they need coil rate changes. The Xa coils for the Camaro are 8 front and 10 rear kg/mm. Also the Pedders SOLUTIONC sway bar kit is a SERIOUS sway bar that, if the vehicle is set up wrong, excess oversteer may occur. We recommend this kit only for SCCA and NASA certified drivers.

Menu System Discount Adjusted Parts Total $3,249.49

For those of you who drop your Camaros a lot, keep in mind there is a very high possibility you will not get your rear cambers to a desired level. There is not enough throw on the eccentrics. Also the front caster is not adjustable. We have a kit that makes it adjustable plus increases front caster as well.

The 27mm front and 32mm rear bar is a seriously aggressive setup and if incorrectly set up, will induce oversteer. This is why we only want sway bar setup for the trained driver.


If you have any more questions, just ask

mike
dms

if one was to purchase this entire kit, will you provide setup details? IE, the shock, sway bay, and alignment settings that are used on the demo car?