[Dropspeed]

Originally Posted by Synner

I will be using this kit since it should have a bit smoother airflow at the entry point
http://www.jegs.com/i/Kenny+Brown+Pe...1300S/10002/-1
Or get 2 of these separately but when I added up the hose and clamps it was about the same price.
http://www.jegs.com/i/Allstar+Perfor...42140/10002/-1
Will be using the quantum kit for the hub brackets.

Those ducts will work much better and would be preferred...but being that they are 5.5" tall they will not fit in the same location without some cutting/fab to get them in there as there is only about 4 to 4.5" of space.

This one that is 6" wide and 3.5" would fit better in there: https://www.pegasusautoracing.com/pr...p?Product=3623 and I will be changing over to this one during the winter utilizing the same location

FYI: You can piece together a kit from Pegasus for much cheaper than the kit from Jegs

https://www.pegasusautoracing.com/ad...ryID=BRAKEDUCT

I did not get mine stuff from here, but I have used them in the past..

-Matt