|
check out Texas Speed or Jannetty racing...there are many others (can't remember)....you'll need internal forged rotating assembly, good set of heads with valve springs....dual fuel pump and you're good to go...if you are doing the build, it is probably $2k-$3k for the internals + $1k for the pump....if not doing the build....about $6k-$7k not including labor to install the engine....plus you'll need a bada$$ tune....you'll need axels and clutch as well; another couple of grand as well....
you can run low boost (5 psi) and it should be fine for a long time....stock!
|