Thread: timing and iat
View Single Post
Old 05-13-2013, 07:41 PM   #3
dan0617
 
dan0617's Avatar
 
Drives: 2011 Inferno Orange SS Convertible
Join Date: Apr 2012
Location: Tyrone, PA
Posts: 640
Timing depends on IAT in my tune. On a 65 degree day, I see IAT at the top of 2nd gear at 114 degrees and timing at 14.5 degrees. By the top of 3rd I see IAT at 159 degrees and timing at 11.5 degrees.

I am surprised to see timing pull that much with that temp but I guess that is what is safe. I'm also surprised to see IAT's climb that much, but is still better than the top mounts I've seen. This is with a Vortech Si trim ECS kit, 12 lbs of boost on a stock cammed L99.

What is everyone else seeing for IAT's after a 1/8th or 1/4 mile pull in 60 or 70 degree weather??
__________________
2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.
dan0617 is offline   Reply With Quote