[racerx8]

I finally installed my Pedders 1LE Permagrin pkge last week. Hang your Camaro from a two post lift and tip #1 heat the stock rear sub-frame bushes until you see the gooey stuff at the top and with a good slide hammer they will pop right out. Clean up the holes and lube the EP1201 HD bushes, slide them right in. Don't forget to time the bushes. Hang the 1LE 32mm bar and 45 minutes later you are done. The EP6577 front radius bushes just remove them, hydraulic press out the old and press in the new and in less than 2 hrs. front and rear done and off the lift. Thanks, Pedders, they work!