As the original source for these has recently dried up, we have found a second source for a very similar product.
We also have a flexible version that can be used for other applications.
The minimum bend radius is about 1.5"
Continuous can be free-cut and works well for shorter lengths.
Tuned is for longer lengths and has a special pattern to minimize dimming in the middle. These can be cut, but, equal amounts should be taken from each end.
Expanded can be free-cut and is for flex applications where there are multiple bends which would make alignment difficult.
Sized for no-drill ABL mod (LED's under panel, not behind dash).
Note that 2013+ cars require three holes to be drilled into the dash to pass the LED's through.
Complete Dash Kit - from $71
http://sjmautoprod.com/5th-gen-Camaro-Dash-ABL-Kit.html
Dash Pipe Package - $25
Driver-Side (Continuous, Flex) and Passenger-Side (Tuned, Rigid).
http://sjmautoprod.com/5th-gen-camar...-pipe-kit.html
Driver Side Flex - $9
For those who have rigid pipes and are not happy with the panel fitment.
http://sjmautoprod.com/light-pipes-5mm.html
Door Panels -
Per Door
Top of Panel: Flex, Tuned:
$17 (2LT/SS stock setup)
http://sjmautoprod.com/Interior/5th-...Pipes-Top.html
Bottom of Panel: Flex, Tuned:
$20 (order both for full-panel lighting)*
* Requires custom door panel
http://sjmautoprod.com/Interior/5th-...es-Bottom.html
Wiring
Dash Harness
T-Tap/Solder: $23
Plug-n-Play: $48 -
ZL1 version available upon request
http://sjmautoprod.com/5th-gen-camar...n-harness.html
Standard Color LED's: $12 ea.
http://sjmautoprod.com/5th-Gen-Camar...o-ABL-LED.html
Splitter: $13 ea.
3-Way Splitter (for full door panels): $18 ea.
Pipes For Customizing (all free-cut)
Rigid, Continuous, 39.4" [1000mm]: $12.92
Rigid, Expanded, 39.4" [1000mm]: $14.25
Flex, Expanded, 39.4" [1000mm]: $20
Flex, Expanded, 78.7" [2000mm]: $28.52
Custom lengths can also be provided.
http://sjmautoprod.com/Light-Pipes-5mm.html
Prices do not include shipping.