Well... It's done. I didn't even bother to do a DIY though. About 30 minutes into the project I realized that if you need a DIY for this, then you probably shouldn't be doing it yourself.
It took a long time and a lot of adjusting to get the tips to line up right. I ended up having to cut the hangers off, straighten them out, rebend them, and weld them back on. I also ended up buying some 2.5" ID couplers to make it easier to weld it to the existing piping. I would suggest using couplers to anyone that attempts this. It makes it non-critical that your cuts line up nicely. It's easier said than done...
She sounds like a beast. I'm totally happy with the new growl.
__________________
01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001
x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1
x = ~x
Last edited by thahemp; 10-25-2012 at 05:16 PM.
|