[OHIO SPEED]

Ohio-Speed now carries:

Rear Camber / Toe Adjustment

Double the range of rear camber and toe adjustment on the popular Camaro to increase handling performance and minimize tire wear.

Remove and replace the OE cam bolts with our 87430 kit for +/- 1.0 degree camber change and +/- 2.0 degrees toe change.

No slotting or grinding needed!

2 sets required per car

Rear Adjustment Range:
Camber +/- 1.0 degree
Toe +/- 2.0 degrees
Installation time: .6 hr/side
Required: 1 per wheel

SS v8 EZ CAM XR (16mm - PAIR)

EZ Cams(TM) make non-adjustable two bolt struts adjustable up to +/- 1.75 degree camber change.

Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change.

Simply remove the upper OE bolt, loosen the lower bolt, install and adjust the EZ Cam to the desired change and then tighten everything to specification.

This is an easy fix for camber issues and a perfect companion sale for any strut job. Save time, money and effort by making aligning two bolt struts a one man job without grinding.

Keep one of each part number in stock, measure the OE threads, replace the OE bolt with SPC's EZ Cams to make your alignment jobs fast and profitable.

Part No. 81280 - Pair

For replacement of 16mm bolts

This kit may also be used on GM vehicles equipped with aftermarket slotted struts with the addition of our adapter plate, 81286 included with cams.

Front Adjustment range:
Camber -1.75 degree to +1.75 degree
Installation time: .4 hr/side
Required: 1 kit for the front


PM for our LOW Introductory Price!