Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

AdamEL · 09-27-2013, 01:25 AM

I did a search to see if anyone had asked about this on the forum, and there was one other guy that asked about it several months ago. The thread wasn't very informative, I'm thinking because the system was just out at that time. So, I wanted to see if any of you guys had any hands-on experience with the Meguiars DA Power System, and if it was worth the purchase.

I have some finish swirls that were there from the previous owner, and I tried removing them by hand with Meguiars Swirl X, but that didn't help much at all. I would consider my paint swirls on the "moderate" side. A little more than light, but not quite extreme. You still have to get it in the right light to see them, but if you get it at that right angle, they look pretty bad. Enough to bug the crap out of me anyway.

I'm thinking the power of this drill mounted system would be enough to take care of my problem, but I would love to hear any educated opinions on the system.

Here's a link to the product:

http://www.meguiarsdirect.com/product_detail.do?q=35621

Thanks, as always!

09-27-2013, 01:25 AM	#1
AdamEL Adam E. Lucchesi Drives: 2010 1SS/RS LS3 VR Join Date: Aug 2012 Location: Memphis, TN Posts: 1,381 View My Garage	Meguiars DA Power System? I did a search to see if anyone had asked about this on the forum, and there was one other guy that asked about it several months ago. The thread wasn't very informative, I'm thinking because the system was just out at that time. So, I wanted to see if any of you guys had any hands-on experience with the Meguiars DA Power System, and if it was worth the purchase. I have some finish swirls that were there from the previous owner, and I tried removing them by hand with Meguiars Swirl X, but that didn't help much at all. I would consider my paint swirls on the "moderate" side. A little more than light, but not quite extreme. You still have to get it in the right light to see them, but if you get it at that right angle, they look pretty bad. Enough to bug the crap out of me anyway. I'm thinking the power of this drill mounted system would be enough to take care of my problem, but I would love to hear any educated opinions on the system. Here's a link to the product: http://www.meguiarsdirect.com/product_detail.do?q=35621 Thanks, as always!