Quote:
Originally Posted by camaro2lt
how hard was it to install the steering rack bushing?
|
Easy. Two bolts on each side. I used a few long extensions and came in from the engine compartment.
Two tips I will give....use blue locktite when putting the bolts back and go ahead and remove and install locktite on the driver side bolts as well. Just do one side and a time when taking out the bolts. I didn't bother to even touch the driver side until it came loose on me and caused me a bunch of headache and a couple extra alignments trying to find the problem.
The steering bush is not something I would go out and make and effort to buy or install by itself but if you're already buying/installing sway bars like I did then it's worth doing.