Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Pics Setting up a Drag Camaro with BMR, Pfadt, Strange, Wilwood Parts!!

Matt @ FSP · 09-21-2013, 05:12 PM

First off, I would like to say that the BMR 15" wheel kit is a very nice kit. Lots of adjustment. Add in the Strange Coilovers, Pfadt Subframe Bushings/Motor Mounts, Wilwood Drag brakes, it makes for an excellent combination.

Did a sweep of ride height with driver before aligning of course, and we'll be working with the coilover adjustments track-side also. We were able to get it aligned with actually 0* degrees of camber in the rear, which as a lot of people know is great for a drag car but hard to achieve with our suspension setups. Just a hair of toe-in in the front.

09-21-2013, 05:12 PM	#1
Matt @ FSP Drives: 2011 Camaro SS Join Date: Dec 2012 Location: Bradenton, FL Posts: 2,610	Pics Setting up a Drag Camaro with BMR, Pfadt, Strange, Wilwood Parts!! First off, I would like to say that the BMR 15" wheel kit is a very nice kit. Lots of adjustment. Add in the Strange Coilovers, Pfadt Subframe Bushings/Motor Mounts, Wilwood Drag brakes, it makes for an excellent combination. Did a sweep of ride height with driver before aligning of course, and we'll be working with the coilover adjustments track-side also. We were able to get it aligned with actually 0* degrees of camber in the rear, which as a lot of people know is great for a drag car but hard to achieve with our suspension setups. Just a hair of toe-in in the front. Attached Images