|
I reduced the frame below the drivers door again, this is the farthest I can go (and the front splitter now matches the side splitter). I'm not sure how crazy GM is about reducing the steel in that area because of side impact but it really makes the car look slim. The top pic is of our Z28, the bottom pic is of the 2006 concept Camaro. The red circles highlight the areas that you can really see the difference. The final reduction might be too much but it is not problem to put that extra inch back on... there is about 5 inches taken out of the side. The third pic of the Z28 is before the additional inch or two was taken out out the sides. The 3rd pic has also been shortened...
|