Thread: spohn or BMR
View Single Post
Old 02-12-2010, 02:58 AM   #34
Info@PeddersUSA.com

 
Info@PeddersUSA.com's Avatar
 
Drives: 5th Gen Rental
Join Date: Aug 2007
Location: New England
Posts: 1,903
Quote:
Originally Posted by BMR Fabrication View Post
Here is a picture from PRI that shows the BMR outer trailing arm bushing installed. How did you "confirm" that we do not replace this bushing? Are you sure that you know which suspension component is the trailing arm?



This is supposed to be a technical board. It really sucks that some suspension companies come on this board and spread inaccurate information.
Since you asked, I will tell. Livornia installed a Pedders Street 1 kit and your trailing arm and toe link arm. The owner posted that the Pedders bushings were noisy. So Livornia picked up his Camaro, and drove it to PRI and delivered the vehicle to us. We confirmed a rather loud squeek in the back end. What we found was your trailing arm making a very serious amount of noise. The fix was to reinstall the owners OE trailing arm and install them with inner and outer Pedders bushings. It was most unfortunate that Pedders got blamed for noises your parts caused. The outer bushing was NOT replaced.

We have a dealer in Ca. that ordered your trailing arm and it did not come with a knuckle bushing. This unit also made a lot of noise and the fix was to remove the BMR arm, and reinstall the OE trailing arm with Pedders bushings front and rear.

We have 4 events like this dealing specifically with BMR trailing arms. Now the owner of this forum assured us that you were notified in private about the PRI problem and he closed the thread out of respect for you. But since you asked, this is what happened and why I make the statements that I have. Now being on your web site, you make NO mention of including a outer knuckle bushing with your kit. It I am mistaken I sincerely apologize.


And your picture does not appear to have a red poly bushing in the outer knuckle of the trailing arm in your picture

Do you need me to give you the link to the thread about the PRI vehicle? I can give you the contact name for Livornia and the customer if you need to verify what I am saying


mike
dms

Last edited by Info@PeddersUSA.com; 02-12-2010 at 03:22 AM.
Info@PeddersUSA.com is offline   Reply With Quote