Quote:
Originally Posted by Synner
Anybody have info on how they routed their 3" tubing to fit?
Halfway there:
 |
Looking great!!!
Quote:
Originally Posted by td195f
Take a look at the photos below. I used the Quantum Backing Plates and 3" hose. I routed over the top of the tie rod/rack and pinion unit and over the top of the front suspension mount on the frame then down into the air inlets installed behind the lower grill. There is a splash guard between the suspension mounts that you'll have to remove one of the plastic fasteners on to route the hose between the frame and the splash guard. This routing results in no rubbing on a 1LE. I have done two track days at Watkins Glen with this setup with no issues.
|
That is nicely done! I have pictures of mine somewhere but I routed them similar to your set up. I'm working on adapters to the ZL1 ducts.
Kind regards,
Jordan Priestley
888.308.6007