Here's all the parts I ordered for just under $100 w/tax from my local Kawasaki dealer. I did a quick internet search and even with shipping from 2 different vendors, parts were much cheaper totaling about $80. (surprise...duh) All the parts except the bracket which is year specific (Kawasaki-zx1000GBF 2011 Ninja 1000), I found on one site: (might try calling powersportsplus re bracket - or search other sites)
http://www.powersportsplus.com with part # drilldown pretty easy (use part # only on top of page & hit enter when part matches)
I ended up flattening out one part of the bracket for my mounting, I figured if nothing else, I could use it for a template. It has a small hole, that a nipple on the reservior inserts into to keep proper position.
Bracket,Reservoir Tan (THIS IS THE ONLY PART I COULDN'T LOCATE ON Powersportsplus)
Part Number: 11056-0263
http://www.ereplacementparts.com/kaw...25_178856.html
The following parts fit Numerous years and models -
Kawasaki 43078-1099 RESERVOIR
Part# 43078-1099
Kawasaki 43026-1051 CAP-BRAKE
Part# 43026-1051
Kawasaki 43028-1057 DIAPHRAGM
Part# 43028-1057
Kawasaki 43027-1051 PLATE-DIAPHRAGM (mounts between cap & diaphragm)
Part# 43027-1051
Kawasaki 92170-1090 CLAMP (holds cap from loosening)
Part# 92170-1090
Kawasaki 92009-1570 SCREW (for clamp)
Part# 92009-1570
The 4 following items I didn't use, since I reverse mounted on bracket, but might come in real handy if mounted as intended. I used stainless steel 1/4" x 20 threads per inch hardware for reservoir to bracket hardware to reverse mount. (I didn't utilize the larger hole in bracket for grommet.... the dampener)
Kawasaki 92075-161 DAMPER RUBBER,BATTERY (not sure why it says battery)
Part# 92075-161
Kawasaki 92152-0017 COLLAR
Part# 92152-0017
Kawasaki 92210-0007 NUT,FLANGED,5MM
Part# 92210-0007
(nut is black & didn't come with the 5mm bolt that inserts through the dampener mount - could have been part of motorcycle )
Kawasaki 92153-0578 BOLT,6X8 (allen head... probably went into motorcycle)
Part# 92153-0578
Dimensions of reservoir not including the bracket are:
2 7/8" total hieght assembled
2 1/2" bottom of bowl to top of cap
2 1/4" cap diameter
I found my latest EDPM brake hose with the braided cloth exterior at a BMW car dealership (don't have part #)
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit
LPE Brotherhood
.