05-29-2009, 06:39 PM
|
#49
|
Drives: 2010 2SS/RS IBM Black Polished
Join Date: Feb 2009
Location: Colorado
Posts: 2,108
|
Quote:
Originally Posted by 96rss/ls6
Yeah I just talked to my guy here and he said he could do it for like 40 or 50 bucks
|
That would be even better. It took a couple hours with one guy and a helper at the time of welding. about 6 ft of pipe and about 3 ft of 3/8" steel for hangers and one zawzaw metal blade. If you go to a shop with a good lift and a good pipe man I dont think that 75 per man hour is unreasonable. I am sure if a guy works for 10 to15 per hour it could be done way cheaper. I just felt good about the quality and know that I got a good deal for the money. But If you can get it done even cheaper.....I dont see that as a negative post....I see that as a positive contribution....Right on dude.
__________________
418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts
 |
|
|