View Single Post
Old 10-18-2011, 09:13 AM   #3
cpages2
PWN5 J00
 
Drives: 2011 Camaro LS
Join Date: Feb 2011
Location: Palm Harbor, FL
Posts: 125
Send a message via AIM to cpages2
Mine came in yesterday. Install took me less then 15 minutes (and I have intake).

I was very skeptical to be honest. Looking at the stock TB and then this model you can see the CNC work but I couldn't wrap my head around it making that much of a difference.

Once installed in the car I started her up and let it warm up. Pulled out to a side street of mine turned off the traction control and mashed gas........ Nothing.... Seemed to me just like stock. Was a little sad at this point.

So I cruised for about 10 minutes and came to a red light. Thought I would give it another go. This time my mind was blown. I was pushed back and my tires broke traction and stayed spinning for sometime as I took off down the road. Nothing could remove the perma-smile I had.

Drove for another hour and the car only continued to get better. I really noticed that with my stock TB the power slowly came on as your accelerated. Where as now its very instant. For the money this is the best mod I have done thus far.

Couldn't be happier!!

- Mike
cpages2 is offline   Reply With Quote