Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Rcfiddy1 · 12-25-2010, 01:24 AM

I did my glovebox light following previous thread. Thanx jbsrace1 http://www.camaro5.com/forums/showth...light=glovebox
But I used GM part number 13503058 for the light housing using a Led from AAC. Its the same housing as trunk in the Camaro.

I then soldered on 2 wires for the ground and switch.

Here is light mounted after cutting hole with razor knife.

After following previous thread for wiring switch here is finished product.

12-25-2010, 01:24 AM	#1
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Glovebox Light #2 I did my glovebox light following previous thread. Thanx jbsrace1 http://www.camaro5.com/forums/showth...light=glovebox But I used GM part number 13503058 for the light housing using a Led from AAC. Its the same housing as trunk in the Camaro. I then soldered on 2 wires for the ground and switch. Here is light mounted after cutting hole with razor knife. After following previous thread for wiring switch here is finished product. __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust. Last edited by Rcfiddy1; 02-08-2014 at 05:58 AM.