|
Not to poo on the party, but until programming is availbile there will be ZERO increase in hp torque within 3-4 drive cycles. You may get an increase in the pull rught after the install, but the bosch will quickly learn down the increase.
The bosch med9x system is based on % torque demand from the driver.
There is a max torque and an Airmass table that dictate what cyl filling shall be. It will then adjust throttle angle ,cam timing, ignition timing in that order to achieve the closest match it can to the requested airmass table.
It is something we have been battling in the LNF camp for a few years now.
|