Quote:
Originally Posted by TooCool5
I don't know if you want to do that, you have to drop the sub frame and tank.
OOOuch
|
Quote:
Originally Posted by SC2150
Agree w/toocool.
Not an easy job in the driveway.
Ask around for a good dealer service department and you will be in good hands.
 |
Only have to drop subframe on the 2010's, as the whole canister with old style valve got replaced as an assembly, fuel tank doesn't get touched though. In 2011 they change the design of the vent solenoid. I can take the two bolts out that hold the canister down, position it, then reach up there through the control arm and twist the solenoid out with one hand. Reverse procedure to install.