|
The wheel bearings are the same, you just can't use the V6 automatic in back. Any
SS, or V6 manual, you can, they're all the same. You use the same ones up front, but
I would use the V6 ones up front for a more beefier bearing; smaller hole for the
axles, and there are no axles up front.
The difference between the V6 Auto, and the SS or V6 Manual is the larger center
hole for the axle shafts.
I used SS/V6 Manual ones up front because they were cheaper than the V6 automatic
ones. I have a V6 auto, so had to use them in back. NAPA had them, and being that
I work in a shop, I only paid $83 for each front. I paid $146 each for the back.
|