[SSE 4 2SS]

Originally Posted by sweasey

At the cost of being the next person banned for sticking up for Granatelli, here it goes. I am 56 and can finally afford the car I always wanted. While I did have a 1969 Z28 in a past life prior to marriage and kids. My 2010 is the first nice car I have had for "me". Meaning not a 4 door to chauffeur my family around.

I researched all my options and in fact did see that SSE 4 2SS started a link about adding Granatelli twin turbos. The fact that Granatelli, Paxton, Whipple, Vortech, Turbonetics and Magnusson are all basically local companies, I sorta had my pick.

I made a trip to Granatelli, Paxton, Vortech, Turbonetics and Magnusson all in the same day as they are only a few miles apart. Far and away Granatelli was the easy choice for me. They make you feel like you are one of their own. I will add that darn near every time I was at Granatelli Joey B and his famous blue bass ass Camaro was there getting more work. So, needless to say I have had several conversations with him. He has always been very complementary to J.R. Granatelli and this is the first time I have heard him say he was not happy and I can tell you his car did not break down every time they worked on it or he would not keep coming back. Its too bad he had to resort to a slam tactic rather then speak with GMS.

My Twin turbo kit and all the suspension came direct from Granatelli and I have been driving it likes it stolen for over a year. I even remember once when Joey B was there I was showing off and bounced my car off a curb and Granatelli in typical fashion bent over backwards to make sure I was OK and help me get my car repaired at no profit to himself. I have been there countless times and seen him do work for Joey B, GMG69, myself and several others for free. Like installing a billet grill in Joey B's car before he left for a car show at a moments notice. He installed my 1G suspension while i waited and let me watch the entire process.

I can't say much more than that but I can say Granatelli has ALWAYS been happy to take my call and happy to help. They offer pick up and delivery and I know they have been to Joey B's house several times at no charge to him.

There was a comment made about parts being made in China - more hearsay. I watch Granatelli and his staff make every suspension part that is on my car right there in house. There are videos out there that show that.

If this gets me banned then so be it but Joey B I think you know Joe would do anything for you if you asked nicely and explained your concerns. In your comment above you say you spun a cam bearing and that when Granatelli worked on your engine the bearings were good. If he installed your camshaft and it eat the bearings there must be a reason. I saw your car make 740rwhp on the dyno with the huge Vortech and Cog drive and then I saw you drive it away like it was stock. It was awesome.

Hope everything works out for you.

adding more:

I re-re-read this thread. Granatelli wires have had so many great things said about them and so many dyno tests from all over the country. They are American made and not cheap crap at indicated by SSE 4 2SS. Sir I know you have tons of pull around here and your voice is well respected. I read your thread and you probably don't recall speaking with me in the parking lot at the motel outside of AZ during CamaroFest. You told me then that you though Granatelli was a stand up guy because he gave you the turbos off his own engine and helped you change them in his trailer in 100-degree weather inside his trailer right there at the event. You told me you were especially impressed because didn't even buy the turbo kit from him. Now you are inferring otherwise. If you recall you talked me out of journal bearing turbos and said that was your mistake - having a big engine set up to race and not just going with ball bearing turbos right out of the box. That is why when I purchased mine I just opted upfront for the biggest baddest turbos Granatelli offered. Did you purchase your turbo kit from Granatelli? Or am I misspoken?

Sir,

Posting like this will most assuredly not get you banned. I respect your opinion and you are certainly entitled to one.

We all have opinions based on our personal experiences and this is how we base our choices.

I'm glad it has all worked out for you. My experience hasn't been so pleasant. It might have something to do with the fact that I can't drive right down the road and walk into their shop...

I do know that the wires I received were junk.

I was left with no option but to buy two new turbos after having the originals on my car for one week. A good vendor would have apologized and offered up the turbos off the display motor, helped me install them, or do it himself, and I would have happily paid the difference for the upgrade.

I can promise you after the comment he made to my wife, about refusing to take a check, I didn't speak highly of him to anyone... and that occurred the first night I arrived....

I didn't outright trash talk him due to him basically holding hostage 3200 dollars worth of my turbo's that he charged me 3600 for. The only people I talked down about him to were close friends of mine... They were way more pissed at him than I was....

He sent MY turbos back to Precision for repair and upgrade and made damn sure they were mailed back to him, so he retained control of them, and then credited my acct for a sum of money of his choosing...

I already had a buyer for them.

He informed you correctly, my kit was bought directly from TTI, due to repeated calls to GMS that consistently got a cue card voice on the phone that couldn't answer questions for my builder, an engineer... So, I got ahold of George at TTI and got the two of them on the phone together... TTI set my builder up as a preferred vendor installer and my builder bought the kit. My builder will no longer work with anything associated with GMS...

I hear this pissed JR off.. I'm sorry but that's between them.... I guess JR was pissed that he didn't get his profit margin... That's between he and George, and should never affect the customer.... This should never even be known by the customer... Keep your dirty laundry at home....

JR was pleased to tell me at the Fest in Phoenix that he had sold 85 of these kits, witnessed statement by many, and that of all of them, I was the only one talking about the kit... WHY... and why screw the best word of mouth he had going.... That just doesn't make sense to me...

JR knew way ahead of time through discussion on the boards that I was going with a 427 CI motor, yet he never mentioned that the turbos with the kit were going to be too small... He seems to be full of facts and so analytical yet he never picked up on this... I certainly wasn't aware of it being a problem at the time...

I have to ask, if you had turbo installed for one week and they crapped the bed, would you want to have to go in an buy two new turbos or drag your car 1000 miles home... How it I had to pay 3600 dollars for two turbos that JR told me retailed for 1600... and he paid substantially less than that for them... I have a price sheet directly from Precision.

This is my opinion, and like you, I am entitled to it based on the way I was treated...