if you (or anyone else with a 4th gen interior) would like to do a leather setup....
http://store.specializedstainless.co...r+Interior+Kit
This kit is made for the DIY guy (or girl). If you have common sense and can follow directions you shouldn't have any problems with this kit. This kit includes everything you need EXCEPT a heat gun, MEK (methyl ethyl ketone). All of these can be purchased at your local hardware store or hobby shop.
The kit includes:
- Detailed instructions with high resolution pictures (must have internet connection to view high resolution pictures). The instructions are written for a ’98-’02 Camaro but will help immensely with any vehicle.
- 2 quarts of glue.
- 2 sheets of sand paper.
- 1 roller.
- 2 brushes.
- 1 razor blade.
- 1 can opener.
- 4 Yards (144” x 54”) of un-cut high quality automotive imitation leather. Make sure to select what color you want from the drop down menu on the right. The material has the following properties & is manufactured to meet the following codes:
* Mildew resistant
* UV Stabilized Pigments
* 54" Wide
* BIFMA Class A
* UFAC Class 1
* California Tech Bulletin 117 Section E
* Motor Vehicle Safety Standard 302