Quote:
Originally Posted by bandit4008
All we should have to do is change the angle on the sensor to be tilted down a few degees. That way the system will think we are not on a upward hill and not activate
|
Not a smart idea...other modules use the yaw sensor not just HSA. It will have to be a programming modification and not a physical modification. I will ask my friend who readily has access to a tech2. When I was a Mercedes tech, I could go into any module and manually adjust the different options and coding on a car, weather it had that specific option or code. I can see if the tech2 will give the same capability. The above diagram only shows signal path, which means only the bcm can turn off HSA