View Single Post
Old 10-21-2013, 02:41 PM   #19
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,111
OP....I know you've already placed your order but thought I would at least let you see my thread. If you're going to be installing these yourself just know what you'll be getting into with that style of insert. If you drop the cradle all together you can probably get a decent angle on those inserts but if you plan to do it from side to side there is a good chance you'll run into the issues I did. Not saying you will 100%. Just know how much easier the Pedders inserts are to install.

Mine were Energy Suspension inserts. I don't know if the poly will be the same as BMR but the design is the same. IMO it was worth the extra money for the Pedders inserts.

http://www.camaro5.com/forums/showth...hlight=pedders
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote