So first thing I went and did was get some halo style lights for her and installed some grill lights as well as some fogs!!!! Sorry guys lost all pics of the breakdown and install after switching phones but I DO have the finished product!!!!!! I installed the halos and the grill lights so that I have a switch for both and I can turn them on and off whenever I want.
For all those people that are trying this, I wired them so that they are powered up in the fuse box under the hood. I did not splice anything. Sam Yesuratnam I must give credit to as he helped me install and wire everything. There is also a small little hole behind the engine in the far right corner that you can feed the wire through which you could run it through to the fuse box from the switches inside. You will have to pull back some of the carpet lining, but you can see the little hole and even feel it. I also would recommend using all factory wire connectors and wire covers as well. GM uses Delco weatherpack connectors for the wiring connectors and that is what I used. They provide great protection and are highly reliable. I also used a soldering tool to solder together whenever I needed.
I purchased the halos from here:
http://www.ebay.com/itm/2010-2011-CH...item4608bb81a4 and the sellers name is Sabersport
For the fogs I bought the DRL harness from Gen5DIY here
http://www.gen5diy.com/PnP_harnesses...oglamp-harness
and I purchased the fog lights online as well here:
http://www.ebay.com/itm/Smoked-Subur...item43bc8f1a31