Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

BLACK10 · 12-31-2013, 08:23 PM

My personal build:

Engine:LS3
Block?stock
CI 376- CR 10.9
Crankshaft? stock
Rods? SCAT
Pistons? Wiseco Forged -3.2 cc
Rings? Wiseco
Heads? Stock milled with LS9 head gaskets
Valves/Springs? PAC dual with stock valves, seals loctited down
Cam? NightFury, of course
Timing Chain? C5R
Oil pump? Melling
Aftermarket Dampner? ATI Super dampener
Anything else? ported intake and tb

Blower:
Type? NOVI 1500 Centri @14psi, stock pulley sizes

Fuel:
Pump? ZL1, BAP
Injectors? Id850
Meth? Alky dual meth
etc

Exhaust:
Headers? Stainless Works 1 7/8"
Cats or No Cats? No cats
Cat back? 3" CNT RACING

760rwhp through a TH400 trans/3500 PTC converter. Approximately 860hp@motor

runs 10.3's on 18"drag radials and 20" fronts, street tune with 14* of timing...

12-31-2013, 08:23 PM	#36
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	My personal build: Engine:LS3 Block?stock CI 376- CR 10.9 Crankshaft? stock Rods? SCAT Pistons? Wiseco Forged -3.2 cc Rings? Wiseco Heads? Stock milled with LS9 head gaskets Valves/Springs? PAC dual with stock valves, seals loctited down Cam? NightFury, of course Timing Chain? C5R Oil pump? Melling Aftermarket Dampner? ATI Super dampener Anything else? ported intake and tb Blower: Type? NOVI 1500 Centri @14psi, stock pulley sizes Fuel: Pump? ZL1, BAP Injectors? Id850 Meth? Alky dual meth etc Exhaust: Headers? Stainless Works 1 7/8" Cats or No Cats? No cats Cat back? 3" CNT RACING 760rwhp through a TH400 trans/3500 PTC converter. Approximately 860hp@motor runs 10.3's on 18"drag radials and 20" fronts, street tune with 14* of timing... Last edited by BLACK10; 12-31-2013 at 08:34 PM.