Quote:
Originally Posted by tjd24
On Pfadt coilovers the ride height is ajdusted with spanner wrenches to adjust the spring perches - you need to raise the car / remove wheels to take weight off the springs. Damper adjustments are on the bottom of each coilover - fronts are easily accessed and rears are tucked into the lower control arm so a bit of a challenge but doable - you do not have to take off the wheels for damper adjustments. Here's a link to the install/settings instructions - http://www.pfadtracing.com/blog/wp-c...stallation.pdf
On ride height I lowered the front 1.25" and the rear 1.0" for a slight forward leaning stance, for dampers they're set at "10" for "sporty street"
|
Thanks for the assist, I wasn't thinking about ride height.