12-31-2018, 06:49 PM | #1 |
Drives: 08 GMC Join Date: Jun 2009
Location: Somewhere in TX
Posts: 92
|
Factory backup camera
I am going to install a factory backup camera to my 2015 Camaro that was recently upgraded to MyLink. I have the camera but the car does not have the connector on the harness and would like to know if anyone knows the brand (Molex, Delphi) and part number of the connector I need. Also does anyone know the pinout of the wiring.
|
01-01-2019, 06:37 AM | #2 |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,328
|
Your best bet is to call GEN5Diy at 928-505-1383 Monday-Friday 0700-1500 PDT. I assure you that they have everything you need to have a factory install. I have dealt with them on a couple of occasions and have found no one better when it comes to our Camaros.
__________________
|
01-17-2019, 09:26 PM | #3 |
Drives: 08 GMC Join Date: Jun 2009
Location: Somewhere in TX
Posts: 92
|
They did my navigation reprogram also bought the harness for it. I didn't want to spend 80$ so I just purchased some Molex 150 connectors and cut the factory plug off and replaced with the Molex. I then made my own wiring harness with some shielded wire and everything works perfectly.
|
01-25-2019, 09:32 AM | #4 |
Drives: 2014 Camaro SS Join Date: Jan 2019
Location: Southern California
Posts: 253
|
Anyone know if you can add the guiding lines on a ‘14 backup cam?
__________________
2014 SS | MGW Flat Stick shifter | Raceseng Slammer shift knob | Z/28 spoiler and grill
|
01-29-2019, 10:06 AM | #5 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
|
01-29-2019, 11:18 AM | #6 |
Drives: 2014 Camaro SS Join Date: Jan 2019
Location: Southern California
Posts: 253
|
__________________
2014 SS | MGW Flat Stick shifter | Raceseng Slammer shift knob | Z/28 spoiler and grill
|
01-29-2019, 09:17 PM | #7 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
On your 14 head unit needs to be reprogrammed.
|
|
|
Thread Tools | |
|
|