05-17-2016, 12:01 PM | #1 |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
yellow pucks in glove box
Hey everyone! First post. It's been 3 years since I've had a sports car and I decided to buy one of these left over Z28's. Mine specifically came with these yellow pucks in the glove box. No one at the dealership knew what they were for. Any help would be appreciated!
|
05-17-2016, 12:05 PM | #2 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
They're probably spring spacers from when the car came in on the flatbed.
They twist those into the suspension springs for additional ground clearance when loading and unloading the cars, then pull them out during the PDI process when the car's up on the hoist.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
05-17-2016, 12:34 PM | #3 |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
That makes sense. Probably worth keeping if I plan to transport it then. I just won't leave them chilling in the glove box. Thanks!
|
05-17-2016, 01:08 PM | #4 |
Drives: 2014 2SS/RS Join Date: Dec 2014
Location: Raleigh, NC
Posts: 1,053
|
What do the spacers look like on the Z28?
Here are the ones for the Camaro ZL1 pulled off another thread: Ron
__________________
2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.
|
05-17-2016, 01:15 PM | #5 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,815
|
they are the shipping spring spacers used for 1" or so more clearance to keep scraping to a minimum unloading from the carriers. I use them when I trailer my Z/28.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
05-17-2016, 01:23 PM | #6 |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
Ron123, looks exactly like those! Thanks Stephen12ZL1. I will probably keep them for the same purposes.
__________________
2014 Red Hot Z/28, CTF car #39/69. HCI, Supercharged, boltons.
2006 SRM GTO, exhaust, VMR V701 wheels (SOLD) 2002 Bright Red Trans Am WS6: HCI, exhaust, tune, Konis, UMI sways, LCAs, Track bar, STB, 2" boxed steel SFCs (SOLD) |
05-17-2016, 02:35 PM | #7 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,486
|
I keep mine in the battery/compressor well under the trunk
__________________
|
05-17-2016, 03:55 PM | #8 |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
That's hauling around unsprung weight Zed Sled! I'm just going to leave them at home until I decide I need to haul the car some place.
__________________
2014 Red Hot Z/28, CTF car #39/69. HCI, Supercharged, boltons.
2006 SRM GTO, exhaust, VMR V701 wheels (SOLD) 2002 Bright Red Trans Am WS6: HCI, exhaust, tune, Konis, UMI sways, LCAs, Track bar, STB, 2" boxed steel SFCs (SOLD) |
05-18-2016, 01:02 PM | #9 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,486
|
Thinking more along the lines of a flat tire on the side of the freeway 500 miles from home and calling for a rollback.
__________________
|
05-18-2016, 01:22 PM | #10 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
Now this is someone that thinks like I do. You must have a glovebox/console as full as I do.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
05-18-2016, 05:02 PM | #11 | |
YOLO Z/28
Drives: 2014 Z/28 Join Date: May 2016
Location: Bowling Green, KY
Posts: 195
|
Quote:
That does make sense. I don't drive the car too far out of town, if I do I will trailer it. that said, doesn't change you can have a flat tire anywhere.
__________________
2014 Red Hot Z/28, CTF car #39/69. HCI, Supercharged, boltons.
2006 SRM GTO, exhaust, VMR V701 wheels (SOLD) 2002 Bright Red Trans Am WS6: HCI, exhaust, tune, Konis, UMI sways, LCAs, Track bar, STB, 2" boxed steel SFCs (SOLD) |
|
05-18-2016, 06:15 PM | #12 |
Drives: Z/28 Join Date: Oct 2015
Location: NJ
Posts: 538
|
One of the first things I did was put a diy tire repair/ inflator kit in my trunk. You can buy oem camaro repair kits on ebay.
|
05-18-2016, 08:40 PM | #13 |
Drives: 2015 black Z/28 Join Date: Nov 2015
Location: Texas
Posts: 1,077
|
+1
__________________
|
05-18-2016, 09:27 PM | #14 |
Drives: 2015 Z/28 Silver #713 Join Date: Feb 2016
Location: Gilbert AZ
Posts: 151
|
Anyone have the PN to these spacers?
|
|
|
|
|